Web Serial Console

Connect to serial devices in your browser. Monitor UART output, send text or hex commands, and download your serial log.

Connection

Checking browser…
Advanced settings

Console output

No serial data yet

Connect to a serial port to see incoming data here.

RX 0 BTX 0 B

Connect to a serial port to send data.


Other Coding Tools


Web Serial Console for monitoring and debugging serial devices

The Web Serial Console reads and writes serial data directly from your browser. Use it as an online serial monitor for Arduino, ESP32, USB-to-UART adapters, and other devices that your operating system exposes as a serial port. The tool processes serial traffic locally in the tab.

How do I open a serial port in the browser?

Plug in your device, choose its baud rate, and click Connect to Serial Port. Select the device in the browser's port picker and confirm. The picker also opens when you reconnect.

Can I use this as an online Arduino Serial Monitor?

Yes. Connect your Arduino over USB, select its serial port, and match the baud rate to your sketch's Serial.begin(...) setting. If the port is busy, close the Arduino IDE's Serial Monitor first. This tool reads and sends serial data; upload sketches from the IDE.

What baud rate and serial settings should I use?

Match your board's firmware or the device's documentation. For example, a sketch that calls Serial.begin(115200) expects 115200 baud. Advanced settings lets you change the data bits, parity, stop bits, or RTS/CTS flow control. The defaults are 8 data bits, no parity, 1 stop bit, and no flow control. Use Custom… for a baud rate outside the presets.

How do I send a command as text or hex?

Use Send as to choose UTF-8 text or hexadecimal bytes. In hex mode, entries such as AA 01 FF, AA01FF, and 0xAA, 0x01, 0xFF send the same three bytes. Choose None, LF, CR, or CRLF under Line ending to match what the device expects. Enter sends the command, Shift+Enter inserts a newline, and the arrow keys recall earlier commands. The attachment button sends a file as raw bytes.

Can I view binary serial data or save the log?

Switch View as to Hex to inspect the actual byte values. Use Text for UTF-8 output, enable timestamps to follow when data arrived, or hide sent data to focus on the device's replies. Turn off auto-scroll to inspect earlier output. Copy or download the current view to keep it. The console retains recent traffic in a rolling buffer.

How do I control DTR, RTS, and other modem signals?

Open Modem signals after connecting. You can set DTR, RTS, and BREAK and query CTS, DSR, DCD, and RI. Signal availability depends on the adapter. With RTS/CTS flow control enabled, the browser manages RTS.

Why is my serial port missing or producing garbled output?

Use a desktop browser with Web Serial support, such as Chrome or Edge, and make sure the operating system can see the device. Some USB serial adapters require a driver. If the port is busy, close the Arduino Serial Monitor or any other program that has it open. For garbled output, verify baud rate, parity, and stop bits, or switch to Hex if your device sends binary data.

Navigator

Quickly navigate to any tool